Please Leave Us A Message
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
+0086-371-63392702
Product Categories
(Total 12 Products for Epoxy Adhesive Glue)
flap disc resin single component epoxy adhesive glue
flap disc resin single component epoxy adhesive glue Product features
1. this product is a room temperature solidification type, yellow brown viscous epoxy resin adhesive;
2. it can be cured at low or normal temperature, with fast curing speed and certain stop-flow;
3. after curing, the bonding part has high bonding...
Blue flap disc one-component epoxy adhesive glue 300KG
Blue flap disc one-component epoxy adhesive glue 300KG Features
Operating temperature (℃) 42--55 degreeInitial setting time (min) 150
Curing temperature (℃) 120
Curing time (min) 240
Hardness after curing (HD) ≥95
Glass transition (Tg) 93℃
Storage time (≤5℃) 1 year This product is used to produce abrasive flap disc by...
epoxy adhesive glue for making flap disc wheel
epoxy adhesive glue for making flap disc wheel
Appearance and physical properties
Type no. 1008-29 1008 b - 29
Viscosity 25℃ 19000-25000cps 3800-4800cps
Color rice white viscous liquid yellow brown viscous liquid
The shelf life is 25℃ for 12 months Scope of application
1. Flap Wheel With Shaft, Abrasive Flap Disc,...
one component epoxy blue Flap disc adhesive glue
Flap disc adhesive glue usage
Composition ratio: A: B = 100:25 (weight ratio)
Available time: 25℃×25-35 minutes
Curing conditions: 25℃×4-5 hours of basic curing
72 hours for maximum strength Product features
1. this product is a room temperature solidification type, yellow brown viscous epoxy resin adhesive;
2. it can...
white/blue resin adhesive epoxy glue for flap disc
white/blue resin adhesive epoxy glue for flap disc
Flap disc adhesive usage
Composition ratio: A: B = 100:25 (weight ratio)
Available time: 25℃×25-35 minutes
Curing conditions: 25℃×4-5 hours of basic curing
72 hours for maximum strength Storage and packaging
1. This product should be sealed and stored in a cool, cool...
single component epoxy resin adhesive glue 3:1 white
single component epoxy resin adhesive glue 3:1 white
Specifications for single component epoxy adhesive for flap disc:
Appearance: Colloidal
Color: Blue / White
Odour: Slight odour
Proportion(water=1):1.42
Viscosity (25℃, mpa.s): 15000~20000
Storage time: 5℃ 6 months
Recommended curing condition: 110~130℃×4~3 hours or...
one component glue epoxy resin for flap wheel
one component glue epoxy resin for flap wheel Instructions
According to the ambient temperature, preheat adhesive among 41 ~ 46℃ before pumping into the pumping system.
According to the application process of the one-component adhesive on the louver automatic machine, it can basically be classified into the following...
double-component epoxy glue for flap wheel adhesive making
double-component epoxy glue for flap wheel adhesive making
Full name: one-component epoxy resin adhesive
Color: blue/white
In the production process, the softening temperature of the glue should be controlled between 45-50 degrees. If the temperature is higher than 50 degrees, it is easy to shorten the storage period...
single componet epoxy adhesive for flap disc glue
single componet epoxy adhesive for flap disc glue
Full name: one-component epoxy resin adhesive
Color: blue/white
According to the temperature difference of the four seasons in China, the shelf life of the adhesive should be able to be maintained at room temperature for more than three months, and the adhesive can be...
epoxy glue for making 115mm flap wheel disc
epoxy glue for making 115mm flap wheel disc
Full name: one-component epoxy resin adhesive
Color: blue/white The inner diameter of the adhesive packaging barrel should match the automatic machine glue pump. The inner diameter of the barrel needs to be accurate. If the barrel diameter is large, it is easy to cause...
white/blue machine use Adhesive flap disc glue 300kg
white/blue machine use Adhesive flap disc glue 300kg
This single component epoxy adhesive glue is mainly used for making flap discs on machine
Chemical Name CAS No. Ratio of Constituents
Epoxy resin 61788-97-4 55%
Calcium carbonate 471-34-1 39.5%
Dicyandiamide 461-58-5 5%
Titanium oxide 1317-80-2 0.5%
resin adhesive...
high toughness white flap disc bonding adhesive glue
high toughness white flap disc bonding adhesive glue
Appearance: Colloidal
Color: Blue / White Odour: Slight odour Proportion(water=1):1.42
Viscosity (25℃, mpa.s): 15000~20000 Storage time: 5℃ 6 months Recommended curing condition: 85~95℃×4~3 hours Hardness(Shore D): ≥90 Recommended temperture on the machine: 40-52...
High Quality Products
Send Us a Message
We didn't put all products on website. If you can't find the product you're looking for, please contact us for more information.
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.