About hook and loop sanding disc

2022-10-31

First of all, sandpaper, fender sandpaper (disc sandpaper) grade and specification (professional known as the size of the number) is different, generally coarse, medium, fine three kinds of points. The higher the size of the sandpaper, the smoother the surface of the sandpaper. When using a disc flocking sandpaper sheet, you can enclose the sandpaper in blocks, then leave the sand surface facing outwards and secure it with staples or glue (if you choose glue, be sure to choose good quality, otherwise it will affect the polishing effect). Then, apply pressure with both hands. Move the flocking sandpaper back and forth into a linear motion, gradually grinding the entire appearance of the product you need to polish, and then in time, spend a moment to polish the edges and corners, finally, after the whole process is polished, and then suck the dust away with the cleaning equipment. The whole polishing process is basically over.
Sandpaper Disc237 Jpg

I mentioned how to preserve the disc sandpaper, or flocking sandpaper, this product, after one or several uses, you have to store the used, maybe unused, so that you can use it again. This requires us to carry out special preservation and protection of it.

1, temperature and humidity requirements: flocking sandpaper should not be stored in the local temperature and humidity change is large, the ambition of the temperature is: 18-220℃; The humidity ambition is: 40-65%, this is because the humidity of the environment, will cause a certain degree of mildew flocking, although polishing does not have a great impact, but the impact on the appearance.
Sandpaper Disc130 Jpg

2, hanging: there are always professionals, will recommend you, in the use of flocking sandpaper should be hung for 1-3 days, in order to prevent bending. However, due to the development of science and technology, including the improvement of our production technology, this process can be ignored by the basic customers. We use our own special technology to improve the quality of the whole product. When you get the flocking sandpaper sheet, it is already in the state of non-bending.

3. In addition, the products should be kept in the warehouse, cool, dry and ventilated. When receiving the disc sandpaper, the customer should also do the corresponding inspection. About the quality inspection, we mainly check these aspects: appearance, mainly check whether the joint is flat and firm; Whether the appearance of holes, sand, lack of sand, glue spots, wrinkles and other unexpected conditions; Whether the margin is regular and there is no gap, if there is a small gap, whether the impact of grinding effect and use after cutting off and so on.

Sandpaper Disc02 Jpg Sandpaper Disc0 Jpg 125mm 150mm Psa Backing Self Adhesive Sandpaper Discs 9 Jpg

Previous: sanding belt splicing tape

Next: abrasive jumbo roll