About the Polishing wheel

The Polishing Wheel is used for polishing the surface of the workpiece and the coating. It is a pressed flat wheel, which is formed by pressing several Polishing Wheels, and the outer surface of each polishing wheel is evenly coated with a layer of polishing oil. There is no need to add oil separately during the polishing process. It has a simple structure and is easy to use. The following are commonly used polishing wheels

1. Pure cotton cloth polishing wheel: The common feature is that they are suitable for polishing various metal surfaces. (According to different metal surface polishing and different production processes, choose polishing wheels of different materials).

2. Glue wheel: (for sticky sand polishing) Its characteristics: high hardness, thick sticky sand, fast polishing, high wear resistance. It is mainly used for surface polishing of metal tool casting and electroplating and iron products.

3. Wire wheel: (sticky sand polishing and general polishing) Its characteristics: suitable hardness, used for polishing and polishing iron products, hardware tools, electroplating, aluminum products, etc.

4. Polishing wax: suitable for polishing low-degree stainless steel products with rough metal surfaces, steel, zinc, aluminum, carbon steel pipes, copper, iron zinc alloys and other metal products. How to use: Use with oil hemp wheel, cloth hemp wheel and wind cloth wheel.

5. Oil hemp wheel: The oil hemp wheel is made of high-quality domestic hemp as raw material, pressed by sisal car, and air-dried after being soaked in tung oil foam, which is hard, sharp and strong in cutting power. It is suitable for the polishing of stainless steel pipes, and its hardness and sharpness make it the best choice. It is also suitable for the polishing and polishing of stainless steel workpieces, as well as alloy workpieces, copper parts, etc. The green oil hemp wheel is not only more temperature-resistant and durable than similar products, but also has a better state of brightness and smoothness in the process of removing strain. The green hemp wheel is suitable for large pipes, small pipes and thin pipes, and the effect will be better.

6. White cloth wheel: using imported high-grade cloth and domestic high-quality cloth as raw materials, the implementation of automated production operations, the white cloth wheel produced is not only temperature-resistant and durable than similar products, but also has better brightness and smoothness in the process of removing spiral patterns. realm.

7. Cloth wheel (sisal wheel): It is made with sisal and cotton cloth and rolled; the sisal is sharp, and the double action of cotton sticky wax has a special grinding force. It is suitable for steel, copper, cast iron, etc. Deep processing and surface polishing of metal products.

8. Wind cloth wheel: It is made of high-density pure cotton cloth according to the 45 degree angle of the cloth weave pattern. It is made by machine stamping. It is fine and wear-resistant. There is a wave-shaped gap between each page. When the cloth wheel rotates at high speed, The high temperature generated by grinding is dissipated and cooled by the gap of the wave fan wind, and the workpiece is not burned, and it is finely ground with white wax or green wax to achieve a super mirror effect.